This station is a low cost CPE, based on a MikroTik RouterBoard RB711-2Hn, which is capable to work in 802.11b/g/n (2.4GHz band). The RB711-2Hn includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time. The integrated on-board wireless card has output power up to 27dBm. Gain of antenna is 14dBi, so total output could be close to 40dBi (10W!).
ATTENTION!
Maximum allowed radiated output power E.I.R.P. for 2.4GHz band in European Union is equal to 100mW (20dB). For outdoor usage of this device you have to software adjust its output power down!
The CPE came as a kit for self assembly, but its assembling is easy and intuitive. In few minutes you will have device ready to mount on a mast. The gland on the bottom protects the antenna from water and heavy weather conditions.
- ANT-BOX-24014-MMCX Integrated Panel Antenna 2.4-2.5GHz 14dBi
- RouterBoard RB711-2Hn CPU Atheros AR7240 400MHz / 32 RAM / 64MB NAND / POE
- Built in radio module 2.4GHz Atheros 802.11b/g/n with MMCX antenna connector
- 24V Power Supply with integrated POE
- Mounting brackets for masts with diameter of 35-60 mm.
- Other necessary mounting parts
| Type |
Panel antenna |
| Frequency |
2400 - 2500 MHz |
| Gain |
14 dBi |
| VSWR |
< 1,5 |
| Impedance |
50 Ohm |
| Polarization |
Vertical or horizontal |
| Vertical plane |
30° |
| Horizontal plane |
30° |
Technical Specification# |
| Input voltage |
AC, 100-240V |
| Output voltage |
DC 24V |
| Current range |
0~0.75A |
| Rated power |
18W |
| Connectors |
2xRJ-45 |
| Working temperature |
0-40 C |
| Working humidity |
0-80% |
| Processor |
Atheros AR7240 400 MHz |
| Wireless |
Built in 2GHz AR9280 802.11b/g/n card, 1x1 MIMO, 1x MMCX connector |
| Ethernet |
10/100 Mbit/s Fast Ethernet port with Auto-MDI/X |
| Power Supply |
only through PoE |
| PoE |
8-30V |
| Operating system |
RouterOS license level 3 |
| Temperature range |
-30 .. +65C |
| Dimensions |
105x105mm |
| Power consumption |
Up to 4.5W at 18V full load (0.245A) |
| Wireless |
Built in 5GHz AR9280 802.11a/n card, u.fl connector |
| RX sensitivity: |
802.11b/g: –92 dBm @ 6Mbps to -75 dBm @ 54 Mbps 802.11n: –92 dBm @ MCS0 to –71 dBm @ MCS7 40MHz |
| TX power: |
802.11b/g: 27dBm @ 6Mbps to 24dBm @ 54 Mbps 802.11n: 27dBm @ MCS0 to 20dBm @ MCS7 |
| Modulations |
OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK |