Client AntBox Station is a low cost CPE based on a MikroTik RouterBoard RB711. This is a complete subscriber unit for Wireless Internet Service Providers. The device consists of a 5GHz, 19dBi panel antena integrated with a high quality enclosure, powerful MikroTik RouterBoard RB411 with RouterOS system. The CPE is ready to install on a mast. The gland on the bottom protects the antenna from water and heavy weather conditions.
- ANT-BOX-56019 Integrated Panel Antenna 5GHz 19dBi
- RouterBoard RB711-5Hn CPU Atheros AR7240 400MHz / 32 RAM / 64MB NAND / POE
- Built in radio module 5GHz AR9280 802.11a/n with ufl connector
- 24V Power Supply, PoE Adapter
- Weatherproof Ethernet connector
- Pigtail u.fl/SMA male ultra low loss for connecting the internal antenna
- Mounting brackets for masts with diameter of 35-60 mm.
- Other necessary mounting parts
| Type |
Panel antenna |
| Frequency |
5150 - 5850 MHz |
| Gain |
19 dBi |
| VSWR |
< 1,4 |
| Impedance |
50 Ohm |
| Polarization |
Vertical or horizontal |
| Vertical plane |
16° |
| Horizontal plane |
16° |
| Input |
AC 100V - 240V |
| Output |
DC 124V |
| Max output load |
1 A |
| Operating temperature |
0-40°C |
| Humidity |
0-80% |
| DC Jack |
2,1x5,5mm |
| Processor |
Atheros AR7240 400 MHz |
| MiniPCI |
64 MB NAND and 32MB SDRAM |
| Ethernet |
1 x 10/100Mbps |
| MiniPCI ports |
1 |
| Power Supply |
10~28V DC |
| PoE |
10~28V |
| Operating system |
RouterOS v4 level 4 |
| Serial port |
DB9 RS232C |
| Power Consumption |
Up to ~4.5W |
| Dimensions |
10.5 cm x 10.5 cm (4.13 in x 4.13 in) |
| Weight: |
67g |
| Wireless |
Built in 5GHz AR9280 802.11a/n card, u.fl connector |
| RX sensitivity: |
802.11a –92 dBm @ 6Mbps to -76 dBm @ 54 Mbps
802.11n: –92 dBm @ MCS0 to –73 dBm @ MCS7 |
| TX power: |
802.11a: 23dBm @ 6Mbps to 19dBm @ 54 Mbps
802.11n: 22dBm @ MCS0 to 15dBm @ MCS7 |
| Modulations |
OFDM: BPSK, QPSK, 16 QAM, 64QAM
DSSS: DBPSK, DQPSK, CCK |
Check Shipping prices
