TP-Link MC220L#
The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC220L will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers and 10 kilometers when utilizing single-mode fiber.
| Standards and Protocols |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Basic Function |
Full Duplex Flow Control (IEEE 802.3x)
Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely |
| Ports |
1 x Gigabit SFP Slot
1 x 1000M RJ45 port (Auto MDI/MDIX) |
| Network Media |
1000BASE-T UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m) |
| Network Media |
1000BASE-FX Multi or Single-mod Fiber |
| LED Indicators |
PWR, Link/Act, RX |
| Safety & Emission |
FCC, CE |
| Dimensions (W*D*H) |
3.7*2.9*1.1 in. (94.5*73.0*27.0 mm) |
| Operating Temperature: |
0℃~40℃ (32℉~104℉) |
| Storage Temperature: |
-40℃~70℃ (-40℉~158℉) |
| Operating Humidity: |
10%~90% non-condensing |
| Storage Humidity: |
5%~90% non-condensing |
| Power Supply |
External Power Adapter |
Check Shipping prices
